DIY on a Saturday

It’s nice to get to the weekend and take care of a few things that you’ve been meaning to get to.

I’ve been playing around with earlier wake-up times lately. This week, I did a couple of 5:30am wake-ups and found that the extra hour in my day didn’t have a negligible impact on the state of my affairs during the later parts of the day. If anything, I was actually *more* ok than most days (I tend to suffer from energy dips at around 10:30am, 1:30pm and 4:30pm). The energy dips I used to chalk up to those being times when a) breakfast runs out; b) when lunch lands in my stomach; and c) my brain quits because it’s 4:30 and it’s naptime). The 5:30 wakeup seemed to negate all of that. I didn’t have to back my bedtime up that much — I racked out at 10:45 or so, but 5:30 really seems to solve a lot of my inertia problems during the day.

But that wasn’t today. Today, with no alarm, and with a head full of shit that’s happening at work, I woke at 6:30. Spent part of my morning just laying in bed, finishing off the book I’ve been reading, and then getting on with my day. Saturdays can be busy, but I took advantage of things right off the bat. Levi and I took care of some yard work, and then made a couple of pit stops. First one was to Salvation Army, where we got a pair of ski poles, and then to Canadian Tire for some ABS pipe, machine screws and street hockey balls. More on that in a minute.

T has art class out in Langford for two hours right around mid-day, which isn’t really worth the trip back in to View Royal, so after dropping her off I decided to grab a coffee and go for a walk in Havenwood Park. A nice walk, and I spent a little time talking with one of the ladies who resides near there. She tipped me off to the best vistas in the neighbourhood.

Once we got home, Levi and I got down to some serious business – the manufacture of two bike polo mallets.

Thanks to teh interwebz, we had a really easy guide to follow – Remove the handles from the ski poles, cut the bottoms off, cut 4.5″ of ABS pipe, drill through, make a pocket on the inside of the pipe for the ski pole head, drill a screw through the side of the pipe and the shaft of the ski pole, bolt in, plug the ski pole end (no core sampling!) and tape like a hockey stick. Repeat with the other side.

Levi worked on a little bike maintenance on his ride while I put the mallets together, and then we headed for the tennis court at our local rec centre.

Now, I can get pretty excited about stuff, and when I find a new obsession, I tend to go all in. Think commuter cycling. Or brewing. Or hockey. I tend to not do half-measures. Bike polo, I’m afraid, is going that way. I think I’m in love.

Levi and I figured out pretty quick that bike polo ain’t exactly the easiest thing to do, but at the same time, it’s so RIDICULOUSLY fun. We hit the court around 2:45. Levi was hooked right from the start. We even got to show our neighbour, Geoff, what it was we were doing. The look on his face said “you’re crazy, but I see where you’re going with this”, and after a while longer, I headed back to the house. I urged Elijah out the door, put him on his bike, gave him the mallet, and he took to the game like a fish to water, too. His comment was that bike polo was “weird” but that he liked it.

I headed back to the house to start to get dinner ready, but Levi stayed out on the court for over two hours in the light drizzle, just working on his shuffle and his shot, not to mention trying to keep his feet off the road. Tomorrow, he plans on eating breakfast and getting on the court right away.

This week might be the first week I head to Victoria Bike Polo.

 

 

Comments are closed.